Send Inquiry


Tesca Technologies Pvt. Ltd.

About Us

About Us:

  • Manufacturer/Exporter-Test, Measuring & Technical Education Training Equipment
  • ISO 9001:2008 Certified Company
  • 23000 sq. feet of operations
  • Member Electronics & Computer Software Export Promotion Council, New Delhi
  • Sales to 52 countries worldwide
  • 2000 Innovative Products, "You Name It & We Have It"
  • Turnkey Project Capabilities for International Tenders


Product Range:

  • Educational Trainers
  • Electronic Components
  • Fluke Product
  • Hand Tools
  • IC Testers & Programmers
  • Interactive WhiteBoard
  • Lab Furniture
  • Physics Training Systems
  • Soldering & De Soldering Systems
  • Test & Measurement Instrument
  • Variac / Dimmerstats



  • Single Sourcing Partner for all your Educational/Didactic Solutions
  • Quality Control at multiple stages
  • Excellent technical support, training, installations & demonstrations
  • Service Support
  • Hassle free shipment ordering & fast response

Products and Services

PC Based Motorized Antenna Trainer

PC Based Motorized Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly used antennas in VHF-UHF-Microwave band in the laboratory for students of all levels. It can be used in stand-alone mode as well as be interfaced with a computer via USB interface. In this Receiving Antenna can be rotated from 0 to 360 Degrees automatically with the help of Stepper motor
controller unit and accordingly Receiving Antennas Signal strength can be monitored. The system consists of a set of tripod for mounting the transmitting antenna and another stepper motor controlled antenna positioning pod for mounting the receiving antenna, 22Antennas, RF Transmitter, RF Receiver, Stepper Controller Unit, Antenna Plotting Software and relevant accessories/ cables.

Network Analyser: RFTransmitter & Receiver:
Frequency : 86 - 860 MHz PLL synthesized
Step Size : 0.05, 0.1, 0.25, 0.5, 1, 10, 100 MHz
Accuracy : 0.01%
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory Location : 1000 individual frequencies and level can be stored/recalled
Output Impedance : 50 Ohms
RF Level : 90 dBuVTypical
Measurement : RF level in dBuV with 0.1dB resolution
Dynamic Range : 60 dB Log
Manual/ Auto Mode : Data logging for antenna gain & polar/cartesian plot
USB interface : Easy connectivity to PC using polar pattern plotting software
Power Supply : 230V @ 50 Hz

Stepper Motor Controller Unit:
Rotation : 0-360 Degrees with 1 Deg resolution
Angular Steps : 1, 5, 10, 45 degrees
Display : 16X2 Backlit LCD
Functions : Menu, Enter, Escape, Up & Down
Memory : 1000 memories for storing angular positions for quick recall
Auto mode : Automatic Rotation with Interface to Receiver
Mode : Clockwise/Anti Clockwise Rotation, Fast /Slow Speed

PC Based Motorized Antenna Trainer Educational trainer Laboratory equipment Antenna trainer Electronics items

Satellite Trainer

* Emulation of path loss at uplink and downlink
* Emulation of frequency translation
* High RF output power and low noise
* PLL synthesizer in Transmitter, Receiver and Satellite
* Condenser microphone and speaker for audio link
* Camera and Monitor for video link
* 4 Dish for linear polarization study
* C/N and S/N measurement facility
* Transmit Audio, Video, Digital/Analog data, Tone, Voice, function generator waveforms etc.
* Receives & demodulates 3 Signals Simultaneously

Technical Specifications

Satellite Uplinking Transmitter
- Frequency : 4 channels in 5.8 Ghz band ; PLL with frequency selection switch & LED indication
- RF output level : +3 dBm nominal with wideband RF amplifier with no manual matching required
- Audio 1 : Int. 1KHz sine wave / Ext Mic Ext. Function Generator waveform
- Audio 2 : Int. 1KHz sine wave / Ext Mic Ext. Function Generator waveform
- Video : Analog Camera/VCD compatible
- Waveform : upto 5MHz Function Generator
- Digital : Max rate 100KHz typical
- Baseband : Transmits 3 signals simultaneously at each uplink frequency
- Processor : PIC16F4 - 8 bit RISC processor based PLL with 4 Mhz clock
- Bandwidth : 16 Mhz
- Modulation : 5/ 5.5MHz Audio FM Modulation 8 Mhz Video FM Modulation
- Antenna : Detachable Parabolic dish with mount
- Inputs : separate terminals for different inputs
- Power Supply : 100-240VAC 47-63Hz

Satellite Downlink Receiver
- Frequency : 4 channels in 5.8 Ghz band PLL Controlled ISM Band
- Sensitivity : -80dBm
- Audio 1out : Speaker inbuilt/output
- Audio 2 out : Speaker inbuilt/output
- Video Out : 5MHz, 1V p/p
- Digital : Max rate 100KHz typical TTL

- RSSI Out : Received signal strength output for C/N measurement
- Antenna : Detachable Parabolic dish with mount
- Demodulation : Receives & demodulates 3 signals simulataneously
- Power Supply : 100-240VAC 47-63Hz

Satellite Link Emulator Transponder Uplink
- Frequency : 4 channels in 5.8 GHz band ; PLL Synthesized ISM Band with select switch
- Sensitivity : -80dBm

Transponder Downlink
- Frequency : 4 channels in 5.8 Ghz band; PLL Synthesized ISM Band
- RF output level : 0 dBm nominal
- Path Loss : Variable attenuation
- Band limiting : 16MHz fixed typical
- Antennas : Detachable Parabolic Dish
- Power Supply : 100-240VAC 47-63Hz

Satellite Trainer Educational trainer Laboratory equipment Electronics items

GPS Trainer

Global Positioning System technology is rapidly changing how people find their way around the earth. Whether it is for fun, saving lives, getting there faster, or whatever uses you can dream up, GPS navigation is becoming more common everyday. GPS Trainer will provide a basic understanding of the GPS Fundamentals, Satellites & Design Aspects of GPS Receiver by actually connecting to the Satellite by GPS Antenna. The Equipment is Useful for Students at B.Tech/B.S. & M.S level in engineering / technical institutes (EC & Telecom) Technical training centers in communication organizations, R&D personal and practicing engineering in research labs and industry.

Channel : 12
Frequency : L1 C/A
Position Accuracy : 25 meters CEP without SA
Velocity Accuracy : 0.1 meters/second, without SA Off
Time Accuracy : Synchronized to GPS time
Update rate : 1/sec. (1 PPS) signal
Receiver Sensitivity : -175 dBW
Input Voltage : +5VDC
Current (Avg.) : 180 mA
Push Button for Reset
Serial Communication : 4800 Baud (default)
Protocol Messenger : NMEA0183V2.2,SIRF binary & RTCMSC -104V 2.0 type 1,2,9
Maximum Altitude : 18000 meters (60,000 Feet) max.
Maximum speed : 515 meters/sec. (1000 knots)max.
Acceleration : 4g. maximum
Jerk : 20 meters/sec-3 max.
Time to First Fix : 45 / 38 / 8sec Cold/Warm/Hot Start
PC Interface - RS 232 Port
Operating Temperature : -40° C to +85° C

GPS Trainer Educational tariner Laboratory equipment

Digital- Analog Lab

The DIGITAL-ANALOG LAB is intended for elementary as well as advance training of Digital & Analog electronics. The trainer covers regular digital & analog circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules, through use of 2mm brass terminals and patch cords. Various clock generators, logic level input/output indicators and DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set.

- Bread Board : Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280 tie points and 4 Distribution Strip swith 100 tie points each, totaling to 1680 tie points. (Size:112mm x170mm)
- Regulated DC Power Supply : +5 V at 1 Amp, -5 V at 1Amp, +12 V/ 0 to 20V at 500mA, and -12 V/ 0 to -20 V at 500 mA
- AC Supply : 5-0-5V, 10-0-10V at 100mA. Can be used as 5V, 10V, 15V, 20V, and also as center tap
- Function Generator : Sine / Square / Traingular / Pulse waveform frequency 1 Hz to 110 Khz in 5 Steps. Variable in between steps. Sine / Square / Traingular waveform output 50mV ~ 10Vpp variable
- Clock Generators : 0.1Hz and 100 Hz, Independent fixed TTL 5V outputs
- Variable Clock Generators : low frequency variable clock 1 Hz to 10 Hz Fixed TTL 5V output
- Pulser Switch : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the counter after every clock pulse)
- Data Switch : 16 independent logic level inputs to select High / Low TTL levels, each with a LED to indicate high / low status and termination
- Logic Indicators : 16 independent buffered logic level indicators for High / Low status indication of digital outputs
- Speaker : 8 ohms miniature speaker with terminations
- Digital meter (3½Digit) : Dual range DC Voltmeter 0-20V / Ammeter 0-200mA
- Continuity Tester : For testing the continuity. Provided with Beeper Sound
- Potentiometers : 6 Potentiometers (1K, 22K, 47k, 100K, 100K and 1Meg) with terminals
BNC to banana adapter : 2 Nos. BNC to 2 channel banana adapter
- Computer interface : Facilities connecting your trainer to either Rs232 communication port of PC ADAPTER using 25 pin (male) connector through 25 nos. of 2 mm banana sockets
- On Board Switches : 2 Switches singal pole double through
- Connecting terminals : 2 / 4 connecting terminals
- Seven segment LED Display : 2 Nos. BCD to Seven Segment Decoder/ Driver IC with terminals
- LED Bar Graph : With 10 LED Indicators and 20 termination
- Logic Probe : Logic level indicator for TTL/CMOS
- Power : 230 V ± 10%, 50 Hz

Digital- Analog Lab Laboratory equipment Educational trainer

Electricity Lab

Electricity Lab is a versatile training kit for a laboratory. It is designed such that all the basic electrical circuits can be tested with the help of this trainer kit. The experiments given with training system develop mental starting from an introduction to the circuit, basic fundamentals and experiments on Ohm's Law, Magnetism, Relay, Power, Lenz's Law, Motors, Diode, Kirchoff's Law, R, L, C and many more. This simple training lab provides a strong foundation for future studies in electrical or electronics. This takes students from the basic of ohm's law, through simple series and parallel circuit analysis and into same elementary aspects of electronics where they will build circuits using capacitors and diodes. With this system a set of coils and cores are provided. These high quality coils (Labeled with number of turns) and laminated iron cores provides an effective
introduction to electromagnetic theory.

01. Meters: 5 Nos.
1.1. AC Voltmeter : 15V
1.2. DC Voltmeter : 15V
1.3. Galvanometer : ± 250uA
1.4. DC Ampere Meter : 0.6Amp
1.5. DC Ampere Meter : 5A
02. Power Supply:
2.1. Power Supplies : 3, 6, 12Vat 3.5A
2.2. Power SupplyAC : 30Vat1A
2.3. Power SupplyDC : 5Vat100mA
03. Switch SPDT
04. Switch DPDT
05. Push switch
06. Logic Switches Two No. Push type
07. Relay 12VDCOne change over
08. Buzzer/Electric Bell
09. Transformer Input 6-0-6V and Output 6-0-6V
10. Bulb6VThree Nos.
11. Resistance 1E2/1W, 5E/5W, 50E/5W,100E/5W, 220E/2W, 470E/2W, 1K/1W, 100K/1W
12. Capacitance 1000MFD/25VTwo Nos.
13. Diode IN4007Two Nos.
14. LED5mm
15. Thermocouple
16. Potentiometer 10K
17. Breadboard 840Tie Points
18. Fuse Holder open type
19. Electromagnetic Induction&Transformer
20. Main Supply 230VAC, 50 Hz

Electricity Lab Laboratory equipment Educational trainer

Power Electronics Lab

Power Electronics Lab is used to perform power electronics circuit experiments. It is very useful in power electronics laboratories for performing power experiments in colleges and universities. It is very for student to know about the characteristics of power electronics devices and the applications of power devices. The applications or power devices are in alarm circuit, lamp flasher, rectifiers, choppers, invertors. It is also used for commutation circuits.

Technical Specifications:
DC Power Supply on Board : ± 5V at 100mA
: ± 12V at 150mA
: ± 15V at 50mA
: ± 35V at 50mA
AC Power Supply on Board : 18V - 0V - 18V at 50mA
: 15V - 0V - 15V at 50mA
Triggering Circuit on Board : 5 gate signal output
Frequency range : 40Hz to 900Hz Variable
Amplitude : 12V
PWM control of G1,G2,G3 and G4 Duty cycle control of “Gate” Signal is 0 to 100%
Single Phase Rectifier : Firing angle control 0°-180° variables
Firing Circuit on Board : Four gate signal output with isolation
SCR Assembly : 4 SCRs 2P4M, 600V,2A
Power Devices : IGBT-G4BC20S, MOSFET-IRF540, UJT-2N2646, DIAC-DB3, TRIAC-BT136, PUT-2N6027
Circuit Components On Board : Capacitor 0.01uF, 0.047uF , 0.1uF, 0.33uF, 1uF/63V(4Nos.) 2.2uF/50V
Diode 1N4007 (8Nos.)
Zener Diode 9V (1Nos. )
Inductors 10mH, (1Nos.), 68mH (2Nos.)
Load Resistance 120E, 270E, 1K, 2K2, each 5W
Resistance on Board (½ W) 22E/5W, 100E/2W, 220E/2W
Resistance on Board(1/4W) 10K (3Nos.), 22K,33K,47K,
Potentio Meter 4K7(2Mos.), 1M(1Nos.)
Pulse Transformer on Board : 2 Nos. PT4502, 1:1 and one is PT4503 1:1:1
Toggle Switch : SPST (1Nos.)
Power Requirements : 220V ±10%, 50Hz

Power Electronics Lab Laboratory equipment Educational trainer

Multimedia Computer Trainer

This trainer provides training of hardware and software theory of a based on Intel Celeron CPU with experiments on 98 & XP.

01 The Different circuit boards of PC/AT Computer are exposed on a PCB.
02 Troubleshooting and fault finding procedure explained in details.
03 Artificial fault creation facilities are provided by the switches.
04 About more than 60 faults can be demonstrated at a glance.
05 Easy measurement of voltage and observation of waveforms. The typical voltages and waveforms are provided.
06 An Exhaustive and Skilled oriented comprehensive instructional manual with complete theory explanation.


1. C.P.U with fan : Intel Celeron.
2. Mother board : Mercury (v2.0, P1865D7).
3. Memory (RAM) : 256 MB DDR RAM.
4. Display adaptor card : Built-in-motherboard.
5. Hard disk : 80 GB-Seagate.
6. Monitor : 15” Color SVGA-LG / SAMSUNG
7. Key board : Multimedia key board (I-ball / EQ.)
8. Mouse : Optical mouse with pad (I-ball / EQ.)
9. SMPS : 450 Watts (ATX).
10. DVD Rom/Writer : LG / SAMSUNG
11. Sound card : Built-in-motherboard.
12. Speakers and Mike : Stereo speakers.
13. TV tuner card : PCI with Rfin, Video in, s-video in
14. Video Camara : Web cam/Easy tune
15. Modem : 56.6 kbps.
16. Ethernet : Built-in-motherboard.

1. Trainer PCB board with fault creating facilities.
2. Training package manual

1. TV tuner card.

Multimedia Computer Trainer Educational trainer Laboratory equipment

UPS Trainer

The UPS trainer is a very versatile training system, has been designed to explain a very interesting and frequently used switching based power supply - The UPS (Uninterrupted Power Supply). The product is designed keeping in mind that a student can understand each block of UPS in a very easy way. Various test points have been provided so that one can check inputs and outputs of each block contained. Being different from a conventional block diagram internal structure of blocks is also shown. AVR (Automatic Voltage Regulator) is presented in such a way that a student can readily understand its functioning and pin configuration. Since UPS is different from an inverter because its switching changeover time is less than 3 mS which is very less so a computer system doesn't get reboot.

Technical Specifications

Input : 190 to 260 V 10%, 50 Hz
Output : 230 V

Transformer specifications
Input : 12 - 0 - 12 V
Outputs : 0, 190, 220, 240, 260 V
18 - 0 for battery charging

UPS Trainer Educational tariner Laboratory equipment

Electrical Machine Trainer

The Electrical Machine Trainer system is provided with specially designed integrated machines of nominal 300 W / 0.5 HP rating. Control Panels containing power supplies, drives, loading arrangements, electronic and digital instruments are provided along with Machines. The training system is suitable to study a wide range of electrical machine syllabi starting from the basic principle and operation to the detailed study of characteristics of different types of AC and DC Machines.

Salient features
• Control Panel contains all safety and tripping measures
• Panel has Polycarbonate Facia with mimic diagrams of components with all terminals brought outside for easy and shock free connections
• The trainer unit covers a wide range of machine syllabus. More than 45 experiments can be conducted
• Easy and safe wiring due to use of colour coded & Electrically insulated terminals (binding posts) on Top
• Dynamically balanced rotors to minimise vibration / noise
• Acrylic viewing window is provided to observe internal structure of machine and to make students familiar with parts of the machines like commutator, slip ring, brush holder, carbon brush, stator, rotor, centrifugal switch etc
• Digital indication of electrical parameters like Voltage, Current, RPM, etc. giving a broad introduction of measuring instruments
• Separates Machines with Common Control Panel of option for individual Control Panels which enables multiple batches of students to conduct experiments simultaneously
• Performance conforming to IS/IES Standards
• Complete Hard and Soft copy of Manual

Electrical Machine Trainer Educational trainer Laboratory equipment

PAM-PPM-PWM Modulation And Demodulation Trainer

PAM-PPM-PWM are the basic Pulse Modulation techniques.
The trainer provides complete set up to the students for
performing experiments on these techniques. They can study
Sampling, Pulse Modulation, Demodulation & Signal
reconstruction process. Separate circuits are provided for each
technique. The Operating Manual provides technology details
and procedure to perform the experiments.

Technical Specifications

Pulse Modulation Techniques :
1. Pulse Amplitude Modulation
2. Pulse Width Modulation
3. Pulse Position Modulation
On-board Sampling
Frequencies (Pulse) : 8 KHz, 16 Khz, 32 KHz, 64 KHz
On-board Generator :
1. Sinewave : 1 KHz & 2 KHz (Gain Adjustable)
2. Squarewave : 1KHz & 2 Khz
Low Pass Filter : 4Th order BW Filter
Voice Communication : Voice Link using dynamic mic & speaker
AC Amplifier : With Adjustable Gain Control
DC Output : 0-4 V (Variable)
Switched Faults : 8 Nos.
Interconnections : 4mm Banana Sockets
Test Points : 29
Power Supply : 220 V ±10 %, 50 Hz / 60 Hz on request
Power Consumption : 3 VA(approx.)

Dimensions (mm) : W 340 × D 241 × H 105
Weight : 2.8 Kg (approx.)
Accessories : Manual, Set of patch cord, Line cord, Microphone, Headphone

PAM-PPM-PWM Modulation And Demodulation Trainer Educational trainer Laboratory equipment

Customers Reviews

Please login or register to comment Click here to login

  • info@tesca.in

  • +919829132777

  • 9413330765

  • IT-2013 Ramchandrapura Industrial Area Sitapura Extension Near Bombay Hospital

  • Other India

  • http://www.tesca.in